Plywood Core Veneer Dryers-manufacture,factory,supplier from China

The demand for wood veneer dryer is increasing year by year,and it has been recognized and purchased by consumers.Traditional natural air-dried wood is prone to problems such as deformation and cracking.The use of wood dryer equipment can effectively solve this problem.The cost of dryer equipment is high, so basic maintenance needs to be done in the later use process,such as the ground,ventilation system, gate,instrument,heating system and debugging system,etc.The specific operations are as follows:1.The floor of the wood dryer equipment should be kept clean and tidy,and the debris should be c

Customers often report that the veneers dried by the dryers they used in the past have cracking problems.

Electricity is a common source of energy for veneer dryers, and it can be a good option in certain situations. However, there are some reasons why an electric-powered veneer dryer may not be recommended in certain circumstances:High energy costs: Electric-powered veneer dryers can have high energy costs, especially if they are not designed for energy efficiency.

Core veneer dryer principle is the core veneer in the upper and lower two pieces of coiler under the clamping preheating drying, coiler through the steam or heat conduction oil heating to transfer the temperature to the core veneer, high temperature coiler and wet core veneer direct contact, high thermal efficiency, heat loss is small, the core veneer is heated uniformly, the wood shrinkage of the benign physical process of evaporation, so the core veneer after drying the moisture content of the uniformity of the wood, the wood colour and lustre, inside and outside of the same, will not produc

Cambodian customers previously purchased two sets of our 56-meter double-layer dryers for drying rubber wood.The maximum output can reach 120 cubic meters a day.The customer feedback is very good, and they recognize our equipment.We must maintain and strive to do better,and welcome to visit our factory at any time.

A veneer drying equipment ordered by a Thai customer has been installed and tested. It is equipped with a biomass burner, which can directly burn the bark to save fuel costs. Our professional engineers went to the customer's factory to guide the installation and trained the factory workers to operate it skillfully. It is used to dry rubber wood.Using new upgraded technology, compared with traditional veneer dryers, it has better drying effect, flat and wrinkle-free, simple operation, stable equipment, low failure rate, and effectively improves the output of the roller dryer.

Five containers of vertical veneer dryer machines were loaded into the container and ship to the Myanmar.  They were expected to be arrived in the customer's factory and start the installation. Friends who are interested in the vertical veneer dryers, please feel free to contact me for the site visiting.  

Roller Veneer Dryer is one of the most often used veneer dryers for drying core veneer in the plywood making process. After peeling, the fresh veneer is fed into the core veneer dryer. Through the press of the upper rollers and heating of the hot air sections, veneer is delivered to the cooling section and finally discharged at the outfeed of the veneer dryer. The veneer after drying has uniform moisture content and it is flat without buckle or end waviness.

Veneer dryer is one of the main equipment in the production process of veneer and plywood, and the drying quality of veneer directly affects the quality of veneer and plywood products. The principle is that the veneer is preheated and dried under the clamping of the upper and lower two coils, and the coil is heated by steam or heat conduction oil to transfer the temperature to the veneer.

With the continuous demand of the wood industry for high efficiency and processing technology, veneer dryers, as key equipment for wood processing, have also made significant progress in technological innovation in recent years. The continuous advancement of technological innovation has also brought new opportunities to the market. Many companies have begun to pay attention to digital and automated drying technology to cope with market competition by improving production efficiency and reducing energy consumption.